TRU-TEST MANUFACTURING COMPANY -- S-110 TRU-TEST SUPREME SILICONE MASONRY SEALER  -- 8010-00F021868
<pre>=====================  Product Identification  =====================

Product ID:S-110 TRU-TEST SUPREME SILICONE MASONRY SEALER
MSDS Date:07/24/1990
FSC:8010
NIIN:00F021868
=== Responsible Party ===
Company Name:TRU-TEST MANUFACTURING COMPANY
Address:201 JANDUS ROAD
City:CARY
State:IL
ZIP:60013
Info Phone Num:1-800-639-5383
Emergency Phone Num:1-800-228-5635
CAGE:TRUTE
=== Contractor Identification ===
Company Name:TRU-TEST MANUFACTURING CO
Address:201 JANDUS RD
Box:City:CARY
State:IL
ZIP:60013
Country:US
Phone:708-639-5383
CAGE:TRUTE

=============  Composition/Information on Ingredients  =============

Ingred Name:WEIGHT PER GALLON IN POUNDS: 6.5 LBS
RTECS #:9999999WG

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
    HYDROTREATED
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 95%
Other REC Limits:500 PPM

Ingred Name:VOL ORGANIC CMPD: <750 GM/L
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: DRYING.
    INHALATION: HEADACHE, DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: DRYING. INHALATION:
    HEADACHE, DIZZINESS & NAUSEA.

=======================  First Aid Measures  =======================

First Aid:EYES: WASH W/FRESH WATER. SKIN: WASH W/WARM WATER & SOAP.
    INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
    NECESSARY. INGESTION: DON'T INDUCE VOMITING. KEEP PERSON WARM &
    QUIET. OBTAIN  MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:105F
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG.
Fire Fighting Procedures:TREAT AS A VOLATILE LIQUID FIRE. WATER SPRAY
    MAY BE INEFFECTIVE. IF WATER SPRAY IS USED, FOG NOZZLES ARE
    PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. CONTAIN SPILL,
    ABSORB W/CLAY, SAND OR FLOOR ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
    FLAMES. FOR STORAGE CONDITIONS SEE OSHA 1910.106. DON'T TAKE
    INTERNALLY. GROUND CONTAINERS WHEN POURING.
Other Precautions:AVOID CONTACT W/SKIN. AVOID FREE FALL OF >2-3 INCHES
    WHEN POURING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED
    RESPIRATOR IF >TLV. USE AN APPROVED MECHANICAL FILTER TO REMOVE
    SOILD AIRBORNE PARTICLES OF OVERSPRAY DURING APPLICATION.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL &/OR LOCAL EXHAUST)
    TO KEEP <TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
    BATHROOM. DON'T REUSE CONTAMINATED CLOTHING.
Supplemental Safety and Health
BOILING RANGE: 300-380

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:95%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FIRE, SPARKS, OPEN FLAME OR
    OTHER SOURCES OF IGNITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
    LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
    PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER BODIES OF WATER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.